FS: 1988 325is black/black

[bad_azz_bmr]

Here is a short run down of things:

-85k km on engine
-300k on body
-body is in very good shape (motoyen did a cut and polish on it and it turned out amazing for the milage and year)
-interior in real nice shape (leather)
-bilstien sports with coilovers
-new tie rods, control arms
-eurathane control arm bushings
-eurathane adjustable camber plates
-rear subframe bushings done
-remus exhaust
-short shift kit
-momo wheel & knob
-speakers re-wired with kenwood PS-709
-CAI
-euro grilles
-red tail lights
-17" team dynamics wheels (absolutely mint)
-cross drilled rotors
-newer pads (about 5k on them)

things it needs (optional)
-a/c was removed & p/s, if need everything is in my garage for them to be replaced, everything was working fine i just wanted to save some weight
-there is a whine from the front of the motor aswell, i believe it is either the water pump or the timing belt tensioner... not that big of a deal, but it is annoying at times....

so i was thinking it is not perfect but a fair price would be about $8500 for the car... what do you guys think? i have about 7k in reciepts for the stuff that has been put in the car in the past few years...

here is a link to some pics...

http://www.cardomain.com/id/bad_azz_bmr

[VtwinVince]

You might want to contact go4carter on this site, I know he's looking for exactly that type of car.

[royalflush313]

awesome looking car.

Are you using Bilstein Sports with GC Coilvers? If so, what kinda spring rate, spring height are you using?
And if not, what coilover are you using?

Your car looks like a perfect candidate for a M-tech II kit swap.

[bad_azz_bmr]

You might want to contact go4carter on this site, I know he's looking for exactly that type of car.


hey thanks for the heads up..



awesome looking car.

Are you using Bilstein Sports with GC Coilvers? If so, what kinda spring rate, spring height are you using?
And if not, what coilover are you using?

Your car looks like a perfect candidate for a M-tech II kit swap.

no they are not ground controls, i am using the same coilovers as Randy Sparre's bad ass S50 e30 (anyone remmeber that guy?) they are a OBX brand, lifetime warranty against sagging units, they are actually awesome for the streets, i had spax lowering springs previously, and that was the most bone jarring ride ever so i switched to these and i couldn't be happier, i am about as low as i can go in the front without totally throughing my camber off and the back i think is at the highest setting (i've always loved the raked look)

and about the m-tech 2? i dont; know... i know it's all oem but i really like how the car looks right now, the chrome on the bumpers with the polished lip on the wheels i couldn't ask for anything cleaner for the amount i put in the car... i had a set of plastic bumpers which i was going to install btu then decided to sell them as i would blend in with every other 89-91 e30 out there.. the 88 was unique.. lower valnces of the newer car but with the older bumpers.. only if they made the euro bumpers in chrome that fit the newer valances (i'm dreaming again)... ok enough of me blabbing on an on.. i just get a bit engulphed in this car (7 years is a long time)...

[go4carter]

Thanks for thinking of me Vince... that is a handsome looking car. I bet it moves along pretty good too.
I've decided to run with a sedan rather than a coupe... function wins out over form.

[VtwinVince]

Okay, I guess the hunt continues...

[Drake]

I'll say it again man, very nice car
Good luck on the sale

[bad_azz_bmr]

I'll say it again man, very nice car
Good luck on the sale


thanks :)

[crashaholic]

I'm interested...unfortunately not until I sell my Fiat first. This isn't the best season for selling a Spyder.

[E30Ty]

Thanks for thinking of me Vince... that is a handsome looking car. I bet it moves along pretty good too.
I've decided to run with a sedan rather than a coupe... function wins out over form.

hey, if you want a mint sedan I'm thinking of selling mine. It's a 318i with the M42. Ive had a lot of fun with it over the last 5 years, and I've babied it no doubt. Ask anyone here who knows it :thumbs:

[crowley84]

hey, if you want a mint sedan I'm thinking of selling mine. It's a 318i with the M42. Ive had a lot of fun with it over the last 5 years, and I've babied it no doubt. Ask anyone here who knows it :thumbs:


Ty's car is minty fresh clean!!! :)

[go4carter]

I bet it's lovely Ty, but I have a fever for 6 cylinders... I can't help it, I'm from Alberta.

[Initial D.oug]

just saw a dark grey sedan on the road. Looks pretty clean 89-91. Didn't see any dents, missing front plastic lip.

Wrote down the number: 604-816-5946

[royalflush313]

just saw a dark grey sedan on the road. Looks pretty clean 89-91. Didn't see any dents, missing front plastic lip.

Wrote down the number: 604-816-5946

I think I've seen this car. If they are the same, I think it's a diamondblack 4dr 325i with a for sale sign, I've seen it running around on Georgia, near Lions Gate bridge couple times. Looks like a clean car.

[go4carter]

Thanks... I'll look into.

Bad-azz, sorry for hijacking your thread.

[bad_azz_bmr]

ok guys, i think the car is going in for a trade tonight.. whatever i get it's gone, so if anyone would be interested please message me with an offer... and if it does sell tonight i will have a few goodies for sale.. rims, grilles..

[Initial D.oug]

Goog Luck Gord. Hopefully you get a good price. What you moving into? Still BMW?

[bad_azz_bmr]

Goog Luck Gord. Hopefully you get a good price. What you moving into? Still BMW?

thanks dude, i hope it works out.. if i can get 5k for a trade i will go for it (i keep my rims and other goodies)

and i'm moving to the competition ;) 1997 c36 :woohoo:

[rain0ne]

5000 is a a big drop. What parts are you removing???

[bad_azz_bmr]

5000 is a a big drop. What parts are you removing???

i;m gonna yank the wheels, stereo, steering wheel & the euro grilles, plus on the 5k i get taxes back because it's a trade, so it;s about 5700, plus if i can sell all the stuff i yank for 1500 i'm up to about 7200... good enough.. lol..

[royalflush313]

i;m gonna yank the wheels, stereo, steering wheel & the euro grilles, plus on the 5k i get taxes back because it's a trade, so it;s about 5700, plus if i can sell all the stuff i yank for 1500 i'm up to about 7200... good enough.. lol..

I'd be interested in the momo wheel and adapter (dependin on price and model) :)

[bad_azz_bmr]

I'd be interested in the momo wheel and adapter (dependin on price and model) :)

sorry i will be giving that to my cousin for a trade with his stock e34 535 wheel... i think he has the same fitment (his wheel looks like the 325 cabrio wheel)..

[bad_azz_bmr]

the trade didnt work out.. they wouldn't flex at all on the price of the benz if i did a trade.. so it's still here... thanks for looking

[rain0ne]

Bump... is it still for sale?

[bad_azz_bmr]

Bump... is it still for sale?

kinda, but not really, i took it too a mechanic to get it checked out and it has a few things that need to be looked after, motor mount, tranny mounts, rear brakes.. and a few other things... so i think i might jsut do the work and keep it...

[motoyen]

Keep it. You didn't want the auto box anyway. While your working on it I would hook up the power steering. :D

[bad_azz_bmr]

Keep it. You didn't want the auto box anyway. While your working on it I would hook up the power steering. :D

no, no power steering i think i'm gonna try to get a manual rack from an euro e30...