Welcome to our BMW Forums

Andrew'02 · 03-14-2009, 03:05 PM

Hi guys. I just bought a 1980 633 CSi about two months ago. It was running great and I was lovin' it. Then one day on the way to work something went wrong! So far all I can suffice is that engine oil stopped flowing properly through the engine and stuff was just banging around like crazy. I've parked the car and my father-in-law and myself are proceeding to remove the engine to further diagnose the problem. I was just wondering if any of you could tell me which is the best shop manual for the car and where is the best place to get one. Also I live on Vancouver Island and I was wondering if anyone knows of any good parts sources here on the Island, or even on the west coast.
I'm would appreciate any and all help in regards to overhauling the E24 engine. Thanks for reading and God Bless.

Shocka · 03-14-2009, 04:57 PM

best bet is just a swap,

http://vancouver.en.craigslist.ca/pts/1068030488.html

Godwin · 03-14-2009, 08:24 PM

Bentley Publisher http://www.bentleypublishers.com/product.htm?code=b588

They will the engine rebuild instructions. however you still have to source the parts like gaskets which might be hard.

Shocka · 03-14-2009, 08:38 PM

Ya, my suggestion might be a little lame. But a cheap low km replacement might be a good option is all.

Andrew'02 · 03-14-2009, 11:27 PM

The link you gave me is for the 5 series...is that the same M30 engine that's in the Sixer?

Shocka · 03-15-2009, 08:53 AM

yes sir, all m30b32's are the same. Ive pulled the really pricey injectors off a 7 series for my 5er. Could be a great time for a b35 swap though. 27hp, 30ftlbs of torque more, and its relatively easy. http://www.mye28.com/viewtopic.php?t=60306, i wouldnt consider this swap unless my 3.2 died. Im happy with the output of it.

Eugene · 03-15-2009, 12:54 PM

For the island it's

Bimmer Parts Northwest
2839 Roberts Rd
Duncan BC, V9L 6W3

The are a BMW specific recycler and have decent prices and a very good selection. Try calling Dave today, and if not definitely tomorrow @ 1-888-309-8899 and tell him Eugene sent you.

Any Bentley manual with a M30 model will apply to you, as the only thing significant that has changed in 25 years of production was the induction/fuel/ignition management system. The internal mechanics are the same.

What a great motor.........
Good luck.

03-14-2009, 03:05 PM	#1 (permalink)
Andrew'02 newbie Name: Andrew Joined: Jan 2009 From: Nanaimo Posts: 4 iTrader: 0 Thanks: 6 0 Times in 0 Posts	Engine rebuild on 1980 633 CSi - need manual and parts source Hi guys. I just bought a 1980 633 CSi about two months ago. It was running great and I was lovin' it. Then one day on the way to work something went wrong! So far all I can suffice is that engine oil stopped flowing properly through the engine and stuff was just banging around like crazy. I've parked the car and my father-in-law and myself are proceeding to remove the engine to further diagnose the problem. I was just wondering if any of you could tell me which is the best shop manual for the car and where is the best place to get one. Also I live on Vancouver Island and I was wondering if anyone knows of any good parts sources here on the Island, or even on the west coast. I'm would appreciate any and all help in regards to overhauling the E24 engine. Thanks for reading and God Bless.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine rebuild on 1980 633 CSi - need manual and parts source	Andrew'02	6-Series	2	03-14-2009 11:37 PM

New To Site?	Need Help?
Register to Participate View Forum Leaders Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

03-14-2009, 04:57 PM	#2 (permalink)
Shocka Senior Member Joined: Jun 2008 From: Vancouver Posts: 362 iTrader: 0 Thanks: 4 11 Times in 10 Posts	best bet is just a swap, http://vancouver.en.craigslist.ca/pts/1068030488.html

03-14-2009, 08:24 PM	#3 (permalink)
Godwin Member Joined: Jun 2008 From: 49.19 N 122.54 W Posts: 60 iTrader: 0 Thanks: 0 2 Times in 2 Posts	Bentley Publisher http://www.bentleypublishers.com/product.htm?code=b588 They will the engine rebuild instructions. however you still have to source the parts like gaskets which might be hard.

03-14-2009, 08:38 PM	#4 (permalink)
Shocka Senior Member Joined: Jun 2008 From: Vancouver Posts: 362 iTrader: 0 Thanks: 4 11 Times in 10 Posts	Ya, my suggestion might be a little lame. But a cheap low km replacement might be a good option is all.

03-14-2009, 11:27 PM	#5 (permalink)
Andrew'02 newbie Name: Andrew Joined: Jan 2009 From: Nanaimo Posts: 4 iTrader: 0 Thanks: 6 0 Times in 0 Posts	The link you gave me is for the 5 series...is that the same M30 engine that's in the Sixer?

03-15-2009, 08:53 AM	#6 (permalink)
Shocka Senior Member Joined: Jun 2008 From: Vancouver Posts: 362 iTrader: 0 Thanks: 4 11 Times in 10 Posts	yes sir, all m30b32's are the same. Ive pulled the really pricey injectors off a 7 series for my 5er. Could be a great time for a b35 swap though. 27hp, 30ftlbs of torque more, and its relatively easy. http://www.mye28.com/viewtopic.php?t=60306, i wouldnt consider this swap unless my 3.2 died. Im happy with the output of it.

03-15-2009, 12:54 PM	#7 (permalink)
Eugene Senior Member Joined: Mar 2006 From: Vancouver Posts: 403 iTrader: 0 Thanks: 4 4 Times in 4 Posts	For the island it's Bimmer Parts Northwest 2839 Roberts Rd Duncan BC, V9L 6W3 The are a BMW specific recycler and have decent prices and a very good selection. Try calling Dave today, and if not definitely tomorrow @ 1-888-309-8899 and tell him Eugene sent you. Any Bentley manual with a M30 model will apply to you, as the only thing significant that has changed in 25 years of production was the induction/fuel/ignition management system. The internal mechanics are the same. What a great motor......... Good luck.

Welcome to our BMW Forums

Engine rebuild on 1980 633 CSi - need manual and parts source